Brother International HL-L3230CDW Online Users Guide HTML - Page 223
Replace the Waste Toner Box, Replace the Drum Unit
View all Brother International HL-L3230CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Error Message Size Error 2-sided Size Mismatch Supplies Belt End Soon Supplies Drum End Soon Supplies Replace Belt Supplies Replace Drum Supplies Toner Low: X (X indicates the toner cartridge or drum unit color that is near the end of its life. BK=Black, C=Cyan, M=Magenta, Y=Yellow.) Supplies WT Box End Soon Toner Error Cause Action The paper size specified in the machine's paper size setting is not Press (if required). available for automatic 2-sided Load the correct size of paper in the tray and printing. set the tray for that paper size. The paper in the tray is not the correct size and is not available for automatic 2-sided printing. Choose a paper size supported by 2-sided printing. Paper sizes available for automatic 2-sided printing are Letter, Legal, Mexico Legal, India Legal and Folio. The paper in the tray is not the correct size. Load the correct size of paper in the tray and set the size of paper for the tray. Press Retry. The belt unit is near the end of its Order a new belt unit before the LCD displays life. Replace Belt. The drum unit is near the end of Order a new drum unit before the LCD its life. displays Replace Drum. It is time to replace the belt unit. Replace the belt unit with a new one. See Related Information: Replace the Belt Unit. It is time to replace the drum unit. Replace the drum unit for the color indicated on the LCD. See Related Information: Replace the Drum Unit. If this message is displayed even after replacing the drum unit with new one, the drum unit counter was not reset. Reset the drum unit counter. See Related Information: Replace the Drum Unit. If the LCD displays this message, Order a new toner cartridge before the LCD you can still print. The toner displays Replace Toner. cartridge is near the end of its life. The waste toner box is almost full. Order a new waste toner box before the LCD displays Replace WT Box. One or more toner cartridges are not installed or not installed correctly. Pull out the drum units. Remove all the toner cartridges, and then put them back into the drum units. Related Information • Troubleshooting • Load and Print Using the Paper Tray • Replace Supplies • Replace the Toner Cartridge • Replace the Drum Unit • Replace the Belt Unit • Replace the Waste Toner Box • Clean the Corona Wires • Calibrate Color Output 218