BenQ GV31 User Manual - Page 29
Power supply, Charging the battery
View all BenQ GV31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Power supply Supply power to your projector by one of the following methods. • (Recommended) Via the provided power adapter and power cord. The Power Mode is switched to Normal or the previous mode you set. • Via a power bank or power adapter with USB-C connector or USB-C cable that are certified by USB-IF. See PD in information in "Specifications" on page 57 for details. The Power Mode is switched to Normal or the previous mode you set. • Via the built-in battery after it is fully charged. The projector's Power Mode is switched to Low Power Consumption automatically. Note • The USB-C port is able to provide power to connected devices. See "Power delivery to a USB-C device" on page 45 for more information. • The USB-A port is able to provide power to connected devices. See "Specifications" on page 57. • Please only use the supplied power adapter to avoid possible dangers such as electric shock and fire. Charging the battery 1. Make sure the appropriate plug has been properly assembled, and then connect the adapter to the power adapter port. 2. Connect the power cord to a power outlet. 3 1 2 The power LED indicator will illuminate according to its charge status, for a full charge wait until the indicator lights up solid green (see "Power LED indicator" on page 29 for more information on LED behavior). It takes about 3 hours. 27