BenQ GV31 User Manual - Page 19
Also check that the signal cables have been connected correctly., source has been selected
View all BenQ GV31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Note • In the connections above, some cables may not be included with the projector (see "Package con- tents" on page 10). They are commercially available from electronics stores. • The connection illustrations are for reference only. • If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly. • The built-in speaker(s) will be muted when the AUDIO OUT jack is connected. • The illustration above is for reference only. 17
17
Note
• In the connections above, some cables may not be included with the projector (see
"Package con-
tents" on page 10
). They are commercially available from electronics stores.
• The connection illustrations are for reference only.
• If the selected video image is not displayed after the projector is turned on and the correct video
source has been selected, check that the video source device is turned on and operating correctly.
Also check that the signal cables have been connected correctly.
• The built-in speaker(s) will be muted when the AUDIO OUT jack is connected.
• The illustration above is for reference only.