2012 Yamaha Motorsports RS Vector Owners Manual - Page 97
2012 Yamaha Motorsports RS Vector Manual
Page 97 highlights
Periodic maintenance and adjustment 9. Tighten the V-belt position adjusting bolts. V-belt position adjusting bolt tightening torque: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 10. Install the V-belt over the primary sheave assembly. 11. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. RS90P / RS90PLT / RST90PGT 1 1. Left lower cover 14. Install the drive guard, and then install the left side cover and the shroud (RS90P / RS90PLT / RST90PGT), or close the shroud (RST90). ESU13923 Drive chain housing To check the drive chain housing oil level 1. 1. Secondary sliding sheave 2. Secondary fixed sheave 2. 12. Install the V-belt between the secondary sliding and fixed sheaves. 3. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud and the right side cover (RS90P / RS90PLT / RST90PGT), or open the shroud (RST90). [See page 63 (RS90P / RS90PLT / RST90PGT) or page 67 (RST90) for the procedures.] Remove the dipstick, wipe it off with a clean rag, and then insert it back into the filler hole. RS90P / RS90PLT / RST90PGT 1 1. V-belt 13. Place the left lower cover in the original position, and then install the screws and the bolts. (RS90P / RS90PLT / RST90PGT). 1. Dipstick 91