2012 Yamaha Motorsports RS Vector Owners Manual - Page 111
2012 Yamaha Motorsports RS Vector Manual
Page 111 highlights
Periodic maintenance and adjustment the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 1. Bulb holder 1 5. 1. Do not touch the glass part of the bulb. Bulb type: Halogen bulb 7. 8. 9. 1. 2. 3. Install the bulb holder cover, and then connect the headlight coupler. Install the headlight access panel, and then install the screws. Install the top cover. Open the shroud. Disconnect the headlight coupler. Remove the bulb holder cover. Install a new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] RST90 1 1. Do not touch the glass part of the bulb. 1 Bulb type: Halogen bulb 6. 7. Install the bulb holder cover, and then connect the headlight coupler. Close the shroud. Remove the shroud and the top cover. (See page 63 for removal procedures.) Remove the headlight unit bolt and the windshield stay bolts on each side of the snowmobile. 2 1. Headlight coupler 2. Bulb holder cover RST90PGT 1. 2. 4. Unhook the bulb holder, and then remove the burnt-out bulb. 105