2012 Yamaha Motorsports RS Vector Owners Manual - Page 102
2012 Yamaha Motorsports RS Vector Manual
Page 102 highlights
Periodic maintenance and adjustment To measure the drive sprocket wear Measure the drive sprocket tooth width at the measuring line shown. If the tooth width is 13 mm (0.51 in) or less, replace the drive sprocket. 1 2 1 3 1. Drive sprocket tooth 2. Measuring line 3. Drive sprocket tooth width ESU12144 2 1. Ski wear limit 2. Ski runner Skis and ski runners Check the skis and ski runners for wear and damage. Replace if necessary. Ski runner wear limit: RS90P 6.0 mm (0.24 in) RS90PLT 6.0 mm (0.24 in) RST90 8.0 mm (0.31 in) RST90PGT 6.0 mm (0.24 in) Ski wear limit: RS90P 12.0 mm (0.47 in) RS90PLT 12.0 mm (0.47 in) RST90 24.0 mm (0.94 in) RST90PGT 12.0 mm (0.47 in) ECS00560 NOTICE Avoid scratching the skis when loading and unloading the snowmobile, when riding in areas with little or no snow, or on sharp edges such as concrete, curbs, etc. This will wear or damage the skis. 1 To align the skis 1. 1. Ski runner wear limit 2. Turn the handlebar so the skis face straight ahead. Check the following for ski alignment: G Skis are facing forward. G Ski toe-out (distance A - distance B) is within specification. 96