2012 Yamaha Motorsports RS Vector Owners Manual - Page 100
2012 Yamaha Motorsports RS Vector Manual
Page 100 highlights
Periodic maintenance and adjustment 1. Remove the shroud and the right side cover (RS90P / RS90PLT / RST90PGT), or open the shroud (RST90). [See page 63 (RS90P / RS90PLT / RST90PGT) or page 67 (RST90) for the procedures.] Check the parking brake pads for wear by measuring the thickness of the pads. If the parking brake pads reach the wear limit, ask a Yamaha dealer to replace them. 1. 2. 3. 4. 5. Parking brake pad adjusting bolt locknut Parking brake pad adjusting bolt Parking brake cable locknut Parking brake cable adjusting bolt Parking brake cable length 2. 1. Parking brake pad wear limit Parking brake pad wear limit: 1.2 mm (0.047 in) 3. Install the right side cover and the shroud (RS90P / RS90PLT / RST90PGT), or close the shroud (RST90). 5. 6. Parking brake cable length: RS90P 43.0-46.5 mm (1.693-1.831 in) RS90PLT 43.0-46.5 mm (1.693-1.831 in) RST90 43.5-46.5 mm (1.713-1.831 in) RST90PGT 43.0-46.5 mm (1.693-1.831 in) Tighten the parking brake cable locknut. Turn the parking brake pad adjusting bolt in or out to adjust the clearance between the parking brake pads and the brake disc. To adjust the parking brake As the parking brake pads wear, adjustment may be necessary to ensure proper brake performance. 1. Remove the shroud and the right side cover (RS90P / RS90PLT / RST90PGT), or open the shroud (RST90). [See page 63 (RS90P / RS90PLT / RST90PGT) or page 67 (RST90) for the procedures.] 2. Loosen the parking brake pad adjusting bolt locknut and the parking brake pad adjusting bolt. 3. Loosen the parking brake cable locknut. 4. Turn the parking brake cable adjusting bolt in or out to adjust the cable length. 4 3 1. 2. 3. 4. Parking brake pad Brake disc Parking brake pad adjusting bolt Parking brake pad adjusting bolt locknut 94