2012 Yamaha Motorsports RS Vector Owners Manual - Page 69
2012 Yamaha Motorsports RS Vector Manual
Page 69 highlights
Periodic maintenance and adjustment ESU14143 TIP If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. Removing and installing the shroud and covers (RS90P / RS90PLT / RST90PGT) EWS00091 WARNING Be sure shroud and covers are secured before operation. A loose shroud or cover could move and cause loss of control. 2 3 1 4 Shroud To remove the shroud Loosen the fasteners, slowly raise the shroud, and then unhook the shroud from the shroud stay. 1. 2. 3. 4. Hexagon wrench cover Hexagon wrench Tool kit Strap 1 2 ESU14230 Recommended equipment It is good practice to carry the spare parts and other necessary equipment with you while riding the snowmobile so that minor repairs can be done if necessary. The following should be carried at all times: G Flashlight G Roll of plastic tape G Steel wire G Tow rope G V-belt G Light bulbs When you start out for a long distance trip, extra fuel should be carried as well. 3 1. Fastener 2. Shroud 3. Shroud stay To install the shroud Hook the end of the shroud onto the shroud stay, slowly lower it to the original position, and then tighten the fasteners. 63