2012 Yamaha Motorsports RS Vector Owners Manual - Page 35
2012 Yamaha Motorsports RS Vector Manual
Page 35 highlights
Control functions The drive guard is designed to protect the Vbelt clutch and V-belt in case parts break or come loose. The drive guard is located behind the left side cover (RS90P / RS90PLT / RST90PGT), or under the shroud (RST90). [See page 63 (RS90P / RS90PLT / RST90PGT) or page 67 (RST90) for information on how to access the drive guard.] 1 To remove the drive guard 1. Pull out the drive guard locking pin from the drive guard rear holder. 1. Drive guard 2. 2 Align the slots in the rear of the drive guard with the projections on the drive guard rear holder, and then insert the drive guard locking pin into the holder as shown. 1 1 2 1. Drive guard 2. Drive guard locking pin 2. Lift up the rear of the drive guard as shown, and then pull the guard rearward to remove it. 1. Drive guard 2. Drive guard locking pin ESU10761 V-belt holders Keep a spare V-belt for emergency use by placing it into the V-belt holders provided. To install the drive guard 1. Fit the front slots in the drive guard over the projections on the drive guard front holder. 29