2009 Yamaha Motorsports Apex LTX GT Owners Manual - Page 73

2009 Yamaha Motorsports Apex LTX GT Manual

Page 73 highlights

Periodic maintenance and adjustment ESU12332 Replacing a fuse EWS00550 WARNING Be sure to use the specified fuse. A wrong fuse could cause electrical system damage or A FIRE HAZARD. ECS00631 NOTICE Be sure to turn the main switch to the off position and disconnect the negative battery lead to prevent accidental short-circuiting. 1. Remove the shroud, the left and right side covers, and the top cover. (See page 41 for removal procedures.) Remove the headlight unit bolts, disconnect the headlight couplers and speedometer coupler, and then remove the headlight unit. 1. Fastener 2. Air temperature sensor coupler 4. Loosen the joint clamp bolts. 2. 1. Joint clamp bolt 5. Slide the clamps away from the air filter case, and then disconnect the crankcase breather hose and the bypass air hose. 1. Headlight unit bolt 3. Unhook the air filter case fastener and disconnect the air temperature sensor coupler. 1. 2. 3. 4. Crankcase breather hose clamp Bypass air hose clamp Crankcase breather hose Bypass air hose 6. Slide the clamp down, and then disconnect the air filter case drain hose. 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

Periodic maintenance and adjustment
67
ESU12332
Replacing a fuse
WARNING
EWS00550
Be sure to use the specified fuse. A wrong
fuse could cause electrical system dam-
age or A FIRE HAZARD.
NOTICE
ECS00631
Be sure to turn the main switch to the off
position and disconnect the negative bat-
tery lead to prevent accidental short-cir-
cuiting.
1.
Remove the shroud, the left and right
side covers, and the top cover. (See page
41 for removal procedures.)
2.
Remove the headlight unit bolts, discon-
nect the headlight couplers and speed-
ometer coupler, and then remove the
headlight unit.
3.
Unhook the air filter case fastener and
disconnect the air temperature sensor
coupler.
4.
Loosen the joint clamp bolts.
5.
Slide the clamps away from the air filter
case, and then disconnect the crankcase
breather hose and the bypass air hose.
6.
Slide the clamp down, and then discon-
nect the air filter case drain hose.
1.
Headlight unit bolt
1. Fastener
2.
Air temperature sensor coupler
1.
Joint clamp bolt
1.
Crankcase breather hose clamp
2.
Bypass air hose clamp
3.
Crankcase breather hose
4.
Bypass air hose