2009 Yamaha Motorsports Apex LTX GT Owners Manual - Page 51

2009 Yamaha Motorsports Apex LTX GT Manual

Get 2009 Yamaha Motorsports Apex LTX GT PDF manuals and user guides View all 2009 Yamaha Motorsports Apex LTX GT manuals

Page 51 highlights

Periodic maintenance and adjustment 2. Remove the headlight unit bolt on each side of the snowmobile and loosen the quick fastener screws shown on the top cover. 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play 1. Headlight unit bolt Throttle cable free play: 2.0-3.0 mm (0.08-0.12 in) 6. 7. Tighten the locknut. Connect the speedometer coupler and headlight couplers, and then install the headlight unit, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1. Quick fastener screw 3. 4. 5. Disconnect the speedometer coupler and headlight couplers, and then remove the headlight unit. Loosen the locknut. Turn the adjusting bolt in or out until the specified throttle cable free play is obtained. 8. Install the headlight unit bolts, and then tighten them to the specified torque. Headlight unit bolt tightening torque: 3 Nm (0.3 m·kgf, 2.2 ft·lbf) 9. Tighten the quick fastener screws on the top cover. 10. Install the shroud. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Periodic maintenance and adjustment
45
2.
Remove the headlight unit bolt on each
side of the snowmobile and loosen the
quick fastener screws shown on the top
cover.
3.
Disconnect the speedometer coupler and
headlight couplers, and then remove the
headlight unit.
4.
Loosen the locknut.
5.
Turn the adjusting bolt in or out until the
specified throttle cable free play is ob-
tained.
6.
Tighten the locknut.
7.
Connect the speedometer coupler and
headlight couplers, and then install the
headlight unit, making sure to insert the
projections on the headlight unit stay into
the slots on the bottom of the headlight
unit.
8.
Install the headlight unit bolts, and then
tighten them to the specified torque.
9.
Tighten the quick fastener screws on the
top cover.
10.
Install the shroud.
1.
Headlight unit bolt
1.
Quick fastener screw
1. Locknut
2.
Throttle cable free play adjusting bolt
3.
Throttle cable free play
Throttle cable free play:
2.0–3.0 mm (0.08–0.12 in)
Headlight unit bolt tightening torque:
3 Nm (0.3 m·kgf, 2.2 ft·lbf)