2009 Yamaha Motorsports Apex LTX GT Owners Manual - Page 48

2009 Yamaha Motorsports Apex LTX GT Manual

Get 2009 Yamaha Motorsports Apex LTX GT PDF manuals and user guides View all 2009 Yamaha Motorsports Apex LTX GT manuals

Page 48 highlights

Periodic maintenance and adjustment 2. Loosen the fasteners, and then remove the side cover. 1. Screw 2. Cable guide 1. Fastener 2. Right side cover 3. Loosen the quick fastener screws, disconnect the main switch coupler and auxiliary DC jack coupler, and then remove the top cover. 1. Fastener 2. Left side cover To install a side cover 1. Place the side cover in the original position, and then tighten the fasteners. 2. Install the shroud. 1. Quick fastener screw 2. Top cover TIP Be sure to fit the projection on the rear of the side cover into the hole in the lower side cover. Top cover To remove the top cover 1. Remove the shroud. (See the above procedure.) 2. Remove the screws, and then remove the cable guide. To install the top cover 1. Connect the main switch coupler and auxiliary DC jack coupler, place the top cover in the original position, and then tighten the quick fastener screws. 2. Pass all of the cables, etc., through the cable guide, place the cable guide in the original position, and then install the screws. 3. Install the shroud. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Periodic maintenance and adjustment
42
2.
Loosen the fasteners, and then remove
the side cover.
To install a side cover
1.
Place the side cover in the original posi-
tion, and then tighten the fasteners.
2.
Install the shroud.
TIP
Be sure to fit the projection on the rear of the
side cover into the hole in the lower side cov-
er.
Top cover
To remove the top cover
1.
Remove the shroud. (See the above pro-
cedure.)
2.
Remove the screws, and then remove
the cable guide.
3.
Loosen the quick fastener screws, dis-
connect the main switch coupler and aux-
iliary DC jack coupler, and then remove
the top cover.
To install the top cover
1.
Connect the main switch coupler and
auxiliary DC jack coupler, place the top
cover in the original position, and then
tighten the quick fastener screws.
2.
Pass all of the cables, etc., through the
cable guide, place the cable guide in the
original position, and then install the
screws.
3.
Install the shroud.
1. Fastener
2.
Right side cover
1. Fastener
2.
Left side cover
1. Screw
2.
Cable guide
1.
Quick fastener screw
2.
Top cover