2009 Yamaha Motorsports Apex LTX GT Owners Manual - Page 69

2009 Yamaha Motorsports Apex LTX GT Manual

Get 2009 Yamaha Motorsports Apex LTX GT PDF manuals and user guides View all 2009 Yamaha Motorsports Apex LTX GT manuals

Page 69 highlights

Periodic maintenance and adjustment Shifted to right 6. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) 7. Slide runners Check the slide runners for wear and damage. If the slide runners reach the wear limit, they should be replaced. 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Shifted to left 1. Slide runner 2. Wear limit height 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Slide runner wear limit height: 10.5 mm (0.41 in) ECS00350 NOTICE Ride on fresh snow frequently. Operating on ice or hard-packed snow will rapidly wear the slide runners. ESU12193 5. Adjust the drive track deflection to specification. NOTICE: The right and left adjusting nuts should be turned an equal amount. [ECS00592] Drive track deflection More than specified Turn in Turn in Less than specified Turn out Turn out Lubrication Lubricate the following points with the specified grease. Left adjusting nut Right adjusting nut 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Periodic maintenance and adjustment
63
Shifted to right
Shifted to left
5.
Adjust the drive track deflection to speci-
fication.
NOTICE:
The right and left ad-
justing nuts should be turned an equal
amount.
[ECS00592]
6.
Recheck alignment and deflection. If nec-
essary, repeat steps 3 to 5 until the prop-
er adjustment is achieved.
7.
Tighten the rear axle nut.
Slide runners
Check the slide runners for wear and dam-
age.
If the slide runners reach the wear limit, they
should be replaced.
NOTICE
ECS00350
Ride on fresh snow frequently. Operating
on ice or hard-packed snow will rapidly
wear the slide runners.
ESU12193
Lubrication
Lubricate the following points with the speci-
fied grease.
1. Forward
2. Gap
3.
Slide runner
4.
Drive track
5.
Slide metal
1. Forward
2. Gap
3.
Slide runner
4.
Drive track
5.
Slide metal
Drive track
deflection
More than
specified
Less than
specified
Left adjusting
nut
Turn in
Turn out
Right adjust-
ing nut
Turn in
Turn out
Rear axle nut tightening torque:
75 Nm (7.5 m·kgf, 54 ft·lbf)
1.
Slide runner
2.
Wear limit height
Slide runner wear limit height:
10.5 mm (0.41 in)