2011 Polaris Cross Country Owners Manual - Page 64
2011 Polaris Cross Country Manual
Page 64 highlights
Maintenance Drive Belt Condition Replace the drive belt if it is cracked or has broken teeth or frayed edges. No matter its condition, the drive belt should be replaced at periodic intervals. See the VICTORY Service Manual or an authorized VICTORY dealer. DO NOT attempt to check belt tension if the belt has been exposed to rain or washing within a 24 hour period or if the belt is hot from riding. Allow the belt to cool down to ambient temperature before measuring belt tension. Replace the drive belt and both sprockets as a set if the drive belt has over 5,000 miles (8,000 km) of service at the time of damage or failure. Drive Belt Wear Analysis Internal tooth cracks (hairline): OK to run, but monitor condition External tooth cracks: Replace belt Missing teeth: Replace belt Chipping (not serious): OK to run, but monitor condition Fuzzy edge cord: OK to run, but monitor condition Hook wear: Replace belt Stone damage: Replace belt if damage is on edge Bevel wear (outboard edge only): OK to run, but monitor condition 60