2009 Polaris Hammer Owners Manual - Page 53
2009 Polaris Hammer Manual
Page 53 highlights
PRE-OPERATION CHECK Electrical Equipment To perform a pre-operation check on the electrical equipment, set the ignition switch to the ON position. Set the ignition switch to the OFF position after completing the electrical equipment portion of the pre-operation check. Indicator Lights The low oil pressure indicator should illuminate until the engine is started. If the transmission is in neutral, the neutral indicator should remain illuminated. Headlight Check the headlight to see that it is on. Set the headlight switch to the high beam position. Headlight brightness should increase and the high beam indicator should illuminate. Taillight / Brake Light With the ignition switch in the ON position, the taillight and the license plate light should illuminate. Apply slight pressure to the front brake lever; taillight brightness should increase. Apply slight pressure to the rear brake pedal; taillight brightness should increase. 48