2009 Polaris Hammer Owners Manual - Page 128

2009 Polaris Hammer Manual

Get 2009 Polaris Hammer PDF manuals and user guides View all 2009 Polaris Hammer manuals

Page 128 highlights

Spark Plugs 4. Remove the spark plug from the cylinder head with a 5/8 inch spark plug socket. Both spark plugs should have the same light or medium tan color deposits on the insulator around the electrode tip. The spark plug electrode tip and bridge should have sharp, square edges. If spark plugs are in good condition and are not due for replacement, you can clean them with a non-metallic stiff bristle brush, set the gap and reinstall them. Replace spark plugs at the recommended intervals. Always replace spark plugs in pairs. 5. Set the electrode gap with a spark plug gap tool. Type: NGK DCPR6E Gap: .031-.035 inch (0.8-0.9 mm) MAINTENANCE .031-.035 inch (0.8-0.9 mm) 6. Clean the mating surface on the cylinder head and install the spark plug with a spark plug socket. Torque: 10.8-14.5 ft-lbs (14.6-19.7 Nm) 7. Reconnect both spark plug wires. 123

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
123
MAINTENANCE
Spark Plugs
4.
Remove the spark plug from the cylinder head with a 5/8 inch spark
plug socket.
Both spark plugs should have the same light or medium tan color deposits
on the insulator around the electrode tip. The spark plug electrode tip and
bridge should have sharp, square edges.
If spark plugs are in good condition and are not due for replacement, you
can clean them with a non-metallic stiff bristle brush, set the gap and
reinstall them.
Replace spark plugs at the recommended intervals. Always replace spark
plugs in pairs.
5.
Set the electrode gap with a spark plug gap tool.
Type:
NGK DCPR6E
Gap:
.031-.035 inch (0.8-0.9 mm)
6.
Clean the mating surface on the cylinder head and install the spark plug with a spark plug socket.
Torque: 10.8-14.5 ft-lbs (14.6-19.7 Nm)
7.
Reconnect both spark plug wires.
.031-.035 inch
(0.8-0.9 mm)