2007 Polaris Outlaw 525 Owners Manual - Page 135
2007 Polaris Outlaw 525 Manual
Page 135 highlights
Maintenance Lights Brake Light Adjustment Check the rear brake light for proper operation before each use of the vehicle. 1. Turn the ignition key on. 2. Lightly apply and release the foot brake several times. A properly operating rear brake light will immediately flash on and off with each movement of the brake pedal. 3. If the light does not operate properly, grasp the switch body with a pliers or similar tool and hold it lightly, but securely. Using a wrench, rotate the adjustment nut clockwise to increase tension on the spring. comes on when there is no pressure on the brake pedal. Switch Body Adjustment Nut Spring NOTE: Rotate the adjusting nut counter-clockwise to decrease tension on the spring if the brake light 4. Recheck and readjust as needed until the brake light operates properly. 132