2007 Polaris Outlaw 525 Owners Manual - Page 116
2007 Polaris Outlaw 525 Manual
Page 116 highlights
Engine Oil Change Cleaning the Short Oil Screen Maintenance 1. Insert a hex key into the plug at the bottom of the engine. See illustration on preceding page. 2. Using a hammer, tap lightly on the key a few times to loosen the seal. Remove the plug. 3. Remove the short oil screen. Clean the screen components thoroughly and blow well with compressed air. 4. Check the O-rings. If damaged, install new O-rings. 5. Reinstall the screen to the plug. 6. Lubricate the threads and reinstall the plug. Torque to 7.5 ft. lbs. (10 Nm). 113
113
Maintenance
Engine Oil Change
Cleaning the Short Oil Screen
1.
Insert a hex key into the plug at the bottom of the engine. See illustration on preceding
page.
2.
Using a hammer, tap lightly on the key a few times to loosen the seal. Remove the plug.
3.
Remove the short oil screen. Clean the screen components thoroughly and blow well
with compressed air.
4.
Check the O-rings. If damaged, install new O-rings.
5.
Reinstall the screen to the plug.
6.
Lubricate the threads and reinstall the plug. Torque to 7.5 ft. lbs. (10 Nm).