2003 Ducati SuperSport 620 S Owners Manual - Page 134

The height of the light beam can be corrected using the screw (1, fig. 65) on the left side of the headlamp. Turn the screw clockwise to lower the beam, anticlockwise to raise it. The side position of the headlamp is adjusted using the adjusting screw (2, fig. 65) on the right side of headlamp. Turn the screw clockwise to move the beam to the right, anticlockwise to move it to the left. Tyre pressures Front tyre: 2.1-2.2 bar Rear tyre: 2.1-2.3 bar As tyre pressure is affected by temperature and altitude variations, you are advised to check and adjust it whenever you are riding in areas where ample variations in temperature or altitude occur. Important Check and set tyre pressure when tyres are cold. To avoid front wheel rim distortion, when riding on bumpy roads, increase front tyre pressure by 0.2 - 0.3 bar. E LEFT RIGHT LEFT RIGHT 2 1 UPPER 2 LOWER fig. 65 58