2001 Ducati Monster 600 Owners Manual - Page 112

Note Never touch the transparent body of the new bulb with your fingers or it will blacken resulting in reduced bulb brilliancy. Insert the locating pegs of the bulb base into their seats to obtain correct alignment; hook the clip (3) to the headlamp holders. Reconnect the cables. Instrument panel (fig. 35) Disassemble the instrument panel by unscrewing the two fastening screws with washer. Disconnect the odometer cable (6) and the main wiring connector (7). Undo the four cap nuts (8) fastening the rear cover. Remove the instrument panel and the rear cover. Replace the burnt bulb with one with equal rating. Note Test the new bulb before refitting the instrument panel elements. E To change the parking light bulb, withdraw the bulb holder (4, fig. 34.2). The bulb is of the bayonet-type: press and rotate anti-clockwise to remove. Fit the spare bulb by pressing and turning clockwise until it clicks Fit the bulb holder again and assemble the rim-reflector assembly. 8 7 6 fig. 34.2 44 fig. 35