2001 Ducati Monster 600 Owners Manual - Page 107

Lubricating cables and joints The condition of the outer sheaths of the throttle and fast-idle cables should be checked at regular intervals. The sheaths should show no signs of squeezing or cracking. Work the controls to make sure the cable slides smoothly inside the sheath: if you feel any friction or hard spots, have the cable replaced by your Ducati dealer or authorized workshop. To prevent these failures, smear the ends of the flexible cables with SHELL Advance Grease or Retinax LX2 at regular intervals. For the throttle cable, it is best to open the device by unscrewing the two fastening screws (1, fig. 30) and then grease the cable ends and the pulley. Warning When refitting the cover, be sure to slide the cable(s) onto the suitable pulley. Refit the cover and tighten the screws (1). To ensure smooth operation of the side stand joint, clean off any dirt and apply SHELL Alvania R3 at all points exposed to friction. fig. 30 600/750 900 1 E 1 39