TASCAM SS-CDR250N Owners Manual V2.00 - Page 94
Setting the SNTP function, Message, Status, Option, Meaning, MULTI JOG, MENU [JOG]
View all TASCAM SS-CDR250N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
13 - Network Functions Setting the SNTP function Use the SNTP page to make settings for automatically synchronizing with the date and time of an Internet time server. SNTP STATUS This shows the current status of the SNTP function. Message Status SUCCESSFUL UPDATE The time was updated properly. SUCCESS UPDATE (SKEW) A delay occurred, but the time was updated. STARTING UP The unit is preparing for operation. ACCESSING SERVER The unit is connecting with a server. DISABLED The SNTP function is disabled. WAITING FOR NETWORK The unit is waiting to confirm the network connection. SERVER NAME NOT FOUND The server name could not be found on the DNS server. SERVER NAME FOUND The server name was found on the DNS server. SERVER CONNECT FAILED The server has not responded. Server responded, but is refusing REFUSING CONNECTIONS additional connections; select a different SNTP server. SNTP UPDATE This shows the setting status of the MODE item on the SNTP UPDATE screen. Select SNTP UPDATE, and open the SNTP UPDATE screen. (See "Menu operation procedures" on page 22.) TIME item: Set the time to acquire the time from the NTP server. Options: 0 0:00 - 00:09 - 23:00 - 23:09 (01:00 steps) (default: 00:00 - 00:09) NOTE i When using the SNTP function, you must set the NETWORK 1 page DNS SETUP item and the NTP Server item, which is explained below. i On this screen, local time is set, not Coordinated Universal Time (UTC). i Since access to SNTP servers on the hour could result in congestion, the unit will access the SNTP server randomly during the first 10 minutes of the hour. NTP SERVER This shows the setting status of the NTP SERVER screen. Select NTP SERVER, and open the NTP SERVER screen. (See "Menu operation procedures" on page 22.) Edit the NTP server name, which must have no more than 32 characters (default: ntp.nict.jp). For details about how to edit the text, see "Editing text" on page 64. NOTE Press the MULTI JOG dial on PRESET5 to open a pull up menu. MODE item: Set the SNTP function update mode. Option Meaning DISABLE (default) Do not use an SNTP function update mode. When the unit starts up, get the time START UP from an NTP server and use it to set the built-in clock. Get the time from an NTP server and use it to set the built-in clock when START UP/24CYCLE the unit starts up, as well as when the time set with the TIME item occurs every 24 hours. Turn the MULTI JOG dial to select a menu item, and press the MULTI JOG dial to input the preset value of that item. Press the MENU [JOG] button to close the pull-up menu. 94 TASCAM SS-CDR250N / SS-R250N