Home » TASCAM Manuals » Audio Mixers » TASCAM SS-CDR250N » Manual Viewer

TASCAM SS-CDR250N Owners Manual V2.00 - Page 84

Selecting the input to use when recording, Setting folders/files to use for FTP server download

Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

11 - Timer Event Functions (USB flash drives and SD cards only) Selecting the input to use when recording If the EVENT TYPE setting is REC, the REC INPUT SELECT item will appear on the EDIT EVENT screen. 1. Select REC INPUT SELECT, and open the REC INPUT SELECT screen. Selecting files/folders for download by inputting path names Even when an FTP server cannot be connected, you can set names of items to be downloaded. On the BROWSE screen for FTP server folder selection, press the MULTI JOG dial to open a pop-up menu. 2. Select the input that will be used when recording automatically at the set time. Options Meaning ANALOG(UNBAL.) Input from ANALOG IN (UNBALANCED) L/R jacks ANALOG(BAL.) Input from MIC/LINE IN (BALANCED) L/R jacks DIGITAL(COAX.) Input from SPDIF IN jack DIGITAL(XLR) Input from AES/EBU IN jack DIGITAL(Dante) Input from IF-DA2 Dante interface card NOTE DIGITAL (Dante) can only be selected if an IF-DA2 Dante interface card (sold separately) is installed in the unit. CAUTION After setting this to DIGITAL(Dante), if the IF-DA2 Dante interface card is removed from the unit, recording events will still be executed without changing the input. This could result in audio not being recorded as desired. 3. Press the MULTI JOG dial. This confirms the setting and returns to the EDIT EVENT screen. Setting folders/files to use for FTP server download If the EVENT TYPE setting is DOWNLOAD or DEL&DOWNLOAD, the DOWNLOAD TARGET item will appear on the EDIT EVENT screen. 1. Select DOWNLOAD TARGET, and press the MULTI JOG dial to open the FTP server DOWNLOAD TARGET screen. 2. Select the folder/file you want to use for downloading on the FTP server BROWSE Screen and press the MULTI JOG dial to open the folder or file pop-up menu. 3. Select the SELECT item and press the MULTI JOG dial to set the folder/file for downloads, and return to the EDIT EVENT screen. Select the KEYBOARD SCREEN item, and press the MULTI JOG dial to open the path name input screen. On the path name input screen, input the path name for the item to be downloaded. Then, return to the EDIT EVENT screen. For details about how to edit the text, see "Editing text" on page 64. NOTE iiOn a path name input screen, characters other than English letters, numerals and symbols cannot be input. ii"/" and ":" only appear when inputting FTP server paths. iiIf the path name is wider than the screen, use the m [A-B] and , [INPUT] buttons to move the cursor and scroll the path name left and right. If the left or right end is not being shown, " ..." will appear at that end. iiTo return to the BROWSE screen, select BROWSE▶ at the top right of the path input screen, and press the MULTI JOG dial. Setting execution schedules for timer events 1. Select SCHEDULE TYPE, and open the SCHEDULE TYPE screen. 2. Select the type of schedule used to execute the timer event. Option Meaning Timer events can be executed on set days DAY OF WEEK of the week (every week).(See "Setting days for timer event execution" on page 85.) Timer events can be executed on set dates. DATE (See "Setting dates for timer event execution" on page 85.) , (See "Setting times for timer event execution" on page 85.) EVERY DAY Timer events can be set to execute daily. 3. Press the MULTI JOG dial. This confirms the setting and returns to the EDIT EVENT screen. 84 TASCAM SS-CDR250N / SS-R250N

Section	Page
IMPORTANT SAFETY PRECAUTIONS	2
IMPORTANT SAFETY INSTRUCTIONS	3
1 – Introduction	9
Difference between the SS-CDR250N and SS-R250N	9
Features	9
Items included with this product	9
Conventions used in this manual	9
Trademarks	10
Precautions for placement and use	10
Notes about power supplies	10
Beware of condensation	10
Cleaning the unit	10
SD cards and USB flash drives	11
Precautions for use	11
SD card write protection	11
Note about formatting	11
About compact discs	11
Precautions for use	11
About CD-R and CD-RW discs	11
Slot loading of discs	12
Using the TEAC Global Site	12
Product registration	12
About TASCAM customer support service	12
2 – Names and Functions of Parts	13
Front panel	13
Rear panel	15
PARALLEL connector overview	16
Wireless remote control (TASCAM RC-10)	17
Home Screen	17
Recording Screen	19
Menu structure	20
Basic Menu Screen operations	22
Menu operation procedures	22
3 – Preparation	23
Making connections	23
Preparing the remote control	24
Installing the coin battery	24
When to replace the battery	24
Battery precautions	24
Using the wireless remote control	24
Installing a Dante interface card (sold separately)	25
Turning the unit on and off	25
Setting the built-in clock date and time	26
Adjusting the display	26
Adjusting the display and indicator brightness	26
Adjusting the display contrast	26
Inserting and removing SD cards	27
Inserting SD cards	27
Removing SD cards	27
Using the security screw	27
SD card write-protection switches	28
Inserting and removing discs (SS-CDR250N only)	28
Inserting discs	28
Ejecting discs	28
Force disc ejection	28
Connecting and disconnecting USB flash drives	28
Selecting media	29
Preparing SD cards and USB flash drives for use	29
Setting the lock function	30
Opening the INFORMATION screen	30
4 – Playback	31
Files that can be played back	31
Tracks and files	31
Playback area	31
Setting the playback area	31
Selecting the current folder or current playlist	31
Setting the play mode	32
Basic playback operations	32
Playing tracks	32
Selecting tracks for playback	32
Skipping to earlier and later tracks	32
Selecting tracks directly	32
Searching backward and forward	33
Jog playback	33
Program playback	33
Setting the program	33
Using the pitch control function	34
Using the key control function	34
Using the repeat playback function	35
Ordinary repeat playback settings	35
A-B repeat playback settings	35
Using the auto cue function	35
Using the auto ready function	36
Using the incremental playback function	36
Playing back in mono	36
Using the ducking function	37
Using the EOM function	37
Setting the EOM tally output trigger	37
Using this function	37
Using the resume function	38
Using the time skip function	38
Setting playback start timing	39
Setting the sampling rate of output audio	39
Using the call function	39
Setting the call function	39
Using the link playback function	40
Making connections for link playback	40
Making link playback settings	40
Using the flash start function	40
5 – Working with Folders and Files (BROWSE screen)	41
Opening the BROWSE screen	41
Navigating the BROWSE screen	42
Icons on the BROWSE screen	42
Folder operations	43
File operations	44
Editing folder and file names	45
Deleting folders and files	45
Undoing folder or file deletion (UNDO)	46
Assigning files to a playlist	46
Creating new folders	47
Copying folders and files	47
Moving folders and files	48
6 – Using the audio CD BROWSE screen (SS-CDR250N only)	49
Opening the audio CD BROWSE screen	49
Selecting a track to play	49
Editing CD-TEXT (CD-R/CD-RW discs only)	49
7 – Editing Playlists (USB flash drives/SD cards only)	50
Playlist editing overview	50
Opening the playlist screen	50
Opening the playlist screen from the BROWSE screen	50
Opening the current playlist screen from the menu page	50
Assigning files to a playlist	50
Playlist menu operations	51
Setting the current playlist	51
Editing playlist names	52
Saving the current playlist with a different name	52
Deleting playlists	52
Creating new playlists	53
Playlist entry menu operations	53
Assigning files to playlists	54
Clearing file assignments from playlists	54
RC-SS150 MODE playlist assignment screen	55
8 – Recording	56
Unexpected power interruptions	56
Selecting the input source	56
Input source display	57
Setting left/right channel inputs separately	57
Setting mic/line input sensitivity	58
Adjusting input signal levels	58
Setting phantom power	59
Setting automatic gain control for mic inputs	59
Using the dynamics function	60
Setting the low-cut filter	60
Setting the recording file format	61
Making recording format settings	61
Setting the second medium for backup and relay recording	62
WAV file settings	62
MP3 file bit rate setting	62
Setting the recording file type	62
Monitoring input signals	63
Basic recording operations	63
Setting the file name format	63
Editing text	64
Applying dithering to recording	64
Using the sampling rate converter	64
Setting the pause mode	65
Skipping recording standby before recording (direct recording)	65
Recording a few seconds in advance (pre-recording)	65
Using the synchronized recording function	65
Synchronized recording settings	65
Sync recording operation overview	66
Incrementing track numbers during recording	66
Incrementing track numbers manually	66
Incrementing track numbers automatically	67
Adding marks manually when recording	68
Adding marks when recording	68
Adding marks automatically when recording	68
Recording duration	69
9 – Using the Edit Menu (USB flash drives and SD cards only	70
Edit menu operations	70
Deleting tracks (DELETE)	70
Dividing tracks (DIVIDE)	71
Combining tracks (COMBINE)	72
Undoing edit menu operations (UNDO)	72
10 – CD functions (SS-CDR250N only)	73
Finalizing CD-R/CD-RW discs	73
Finalizing discs	73
Unfinalizing CD-RW discs	73
Erasing CD-RW discs	74
Erasing tracks	74
Refreshing discs	74
Copying files from USB flash drives and SD cards to blank CDs with or without conversion	75
Creating audio CDs	75
Creating data CDs	76
Copying files from CDs to USB flash drives and SD cards with or without conversion	78
Converting and copying audio CD tracks	78
Copying files on a data CD	79
11 – Timer Event Functions (USB flash drives and SD cards only)	81
Turning the timer event function on/off	81
Opening the timer event list screen	81
Timer event bliss menu operations	82
Editing timer events	82
Setting the event type	83
Selecting files for playback	83
Specifying files for playback	83
Selecting the input to use when recording	84
Setting folders/files to use for FTP server download	84
Selecting files/folders for download by inputting path names	84
Setting execution schedules for timer events	84
Setting days for timer event execution	85
Setting dates for timer event execution	85
Setting times for timer event execution	85
Setting what happens at the time set for the playback timer event	85
Setting the frequency intervals of events that repeat	85
Setting the number of event repetitions	85
Creating new timer events	86
Deleting timer events	86
Deleting all timer events	86
12 – Mark and Locate Functions	87
Mark functions (USB flash drives and SD cards only)	87
Adding marks	87
Using marks	87
Moving to marks	88
Editing mark names	88
Deleting marks	88
Deleting all marks in the current file	88
Editing mark locations	88
Viewing mark information	88
Locating to a specific time	89
Locating before completely specifying the time	89
13 – Network Functions	90
Network function settings	90
FTP client function settings	91
Selecting folders to use by inputting path names	92
FTP server functions	92
Remote control	93
Setting the SNTP function	94
14 – Other Settings, Information Screens and Keyboard Operations	96
Power on action function setting	96
Adjusting the analog output	96
Setting the remote power control function	96
Setting the reference level	96
Using a USB keyboard to operate the unit	97
Setting the keyboard type	97
Using the keyboard to input names and values	97
List of keyboard operations	97
Viewing media information	99
Rebuilding media	99
Restoring factory default settings	99
Saving and loading user settings	99
Saving user settings	99
Loading user settings	99
Exporting/importing system backup data (USB flash drives and SD cards only)	100
Checking the firmware version	101
Firmware update procedures (USB flash drives and SD cards only)	101
15– Using the Remote Control Connectors	102
Using the RS-232C connector	102
Using a footswitch (TASCAM RC-3F)	102
Setting up the footswitch	102
Using the footswitch	102
Setting the Record Tally	102
16 – Messages	103
17 – Troubleshooting	106
18 – Specifications	107
General	107
Input and output	107
Analog audio input and output ratings	107
Digital audio input/output ratings	107
Control input/output	108
Audio performance	108
Other	108
Dimensional drawings	109

Match case Limit results 1 per page

TASCAM

SS-CDR250N / SS-R250N

11 – Timer Event Functions (USB flash drives and SD cards only)

Selecting the input to use when recording

If the

EVENT TYPE

setting is

REC

, the

REC INPUT SELECT

item will

appear on the

EDIT EVENT

screen.

Select

REC INPUT SELECT

, and open the

REC INPUT SELECT

screen.

Select the input that will be used when recording automati-

cally at the set time.

Options

Meaning

ANALOG(UNBAL.)

Input from

ANALOG IN (UNBALANCED)

L/R

jacks

ANALOG(BAL.)

Input from

MIC/LINE IN (BALANCED)

L/R

jacks

DIGITAL(COAX.)

Input from

SPDIF IN

jack

DIGITAL(XLR)

Input from

AES/EBU IN

jack

DIGITAL(Dante)

Input from IF-DA2 Dante interface card

NOTE

DIGITAL (Dante)

can only be selected if an IF-DA2 Dante in-

terface card (sold separately) is installed in the unit.

CAUTION

After setting this to

DIGITAL(Dante)

, if the IF-DA2 Dante in-

terface card is removed from the unit, recording events will

still be executed without changing the input.

This could result

in audio not being recorded as desired.

Press the

MULTI JOG

dial.

This confirms the setting and returns to the

EDIT EVENT

screen.

Setting folders/files to use for FTP server

download

If the

EVENT TYPE

setting is

DOWNLOAD

DEL&DOWNLOAD

, the

DOWNLOAD TARGET

item will appear on the

EDIT EVENT

screen.

Select

DOWNLOAD TARGET

, and press the

MULTI JOG

dial to

open the FTP server

DOWNLOAD TARGET

screen.

Select the folder/file you want to use for downloading on the

FTP server

BROWSE

Screen and press the

MULTI JOG

dial to

open the folder or file pop-up menu.

Select the

SELECT

item and press the

MULTI JOG

dial

to set

the folder/file for downloads, and return to the

EDIT EVENT

screen.

Selecting files/folders for download by in-

putting path names

Even when an FTP server cannot be connected, you can set

names of items to be downloaded.

On the

BROWSE

screen for FTP server folder selection, press the

MULTI JOG

dial to open a pop-up menu.

Select the

KEYBOARD SCREEN

item, and press the

MULTI JOG

dial

to open the path name input screen.

On the path name input screen, input the path name for the item

to be downloaded. Then, return to the

EDIT EVENT

screen.

For details about how to edit the text, see “Editing text” on page

64.

NOTE

On a path name input screen, characters other than English

letters, numerals and symbols cannot be input.

“/” and “:” only appear when inputting FTP server paths.

If the path name is wider than the screen, use the

[A-B]

and

[INPUT]

buttons

to move the cursor and scroll the

path name left and right. If the left or right end is not being

shown,

shown, “

…

”

will appear at that end.

To return to the

BROWSE

screen, select

BROWSE▶

at the top

right of the path input screen, and press the

MULTI JOG

dial.

Setting execution schedules for timer events

Select

SCHEDULE TYPE

, and open the

SCHEDULE TYPE

screen.

Select the type of schedule used to execute the timer event.

Option

Meaning

DAY OF WEEK

Timer events can be executed on set days

of the week (every week).(See “Setting days

for timer event execution” on page 85.)

DATE

Timer events can be executed on set dates.

(See “Setting dates for timer event execu-

tion” on page 85.) , (See “Setting times for

timer event execution” on page 85.)

EVERY DAY

Timer events can be set to execute daily.

Press the

MULTI JOG

dial.

This confirms the setting and returns to the

EDIT EVENT

screen.