Sanyo PLC-ZM5000L RS232C Expand - Page 53

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications 8.11 Other Commands 8.11.1 CF_KEYEMU Command Command "CF_KEYEMU_%1" [CR] "RIGHT Move Pointer rightward in On-Screen Display Menu "LEFT Move Pointer leftward in On-Screen Display Menu "UP Move Pointer to upward On-Screen Display Menu %1 "DN Move Pointer to downward in On-Screen Display Menu "SELECT The same operation as "SELECT" button of RC "AUTOPC Execute Auto PC Adj. operation "LENSSHIFT" --------- Return the Lens to center position This command is behaving the same as corresponding keys of Projector. Once Auto PC adj. is started with "AUTOPC" command, it does not stop with receiving the command another time. *When transmit command of CF_KEYEMU parameter - When User menu is displayed: function is carried out with having displayed User menu. - When User menu isn't displayed: error code "000" is returned, function is non-practice. Details * "101" is not returned even if a command of CF_KEYEMU is transmitted when cursor moves to the item which cannot toggle at an edge of the main menu. EX): Display main menu, and move to second menu of Image adj. Move a cursor to "Quit" position, and transmit a command of KEYEMU_DN. Then a cursor doesn't toggle and "000" is returned. *When transmit command of CF_KEYEMU AUTOPC - When practice of Auto pc adj is possible: Function is practice, "000" is returned. - When practice of Auto pc adj is impossible: display exclamation mark, "000" is returned. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.11.2 CF_MENU Command Command "CF_MENU_%1" [CR] %1 "ON Display On-Screen Display Menu "OFF Hide On-Screen Display Menu Details Set On-Screen Display mode. (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 53/89