Sanyo PLC-ZM5000L RS232C Expand - Page 19
Image Command, 4.1 CF_ BRIGHT Command, 4.2 CF_CONT Command, 4.3 CF_COLOR Command, 4.4 CF_TINT
UPC - 086483079450
View all Sanyo PLC-ZM5000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_ BRIGHT Command Command "CF_BRIGHT_%1" [CR] "000-063 Directly specify setting value of Brightness %1 "UP Increment setting value of Brightness by 1 "DN Decrement setting value of Brightness by 1 Details Set user controlled value of Brightness (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.2 CF_CONT Command Command "CF_CONT_%1" [CR] "000-063 Directly specify setting value of Contrast %1 "UP Increment setting value of Contrast by 1 "DN Decrement setting value of Contrast by 1 Details Set user controlled value of Contrast (Available only in the normal Power ON status) The value set by this command will not be stored in the projector. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.3 CF_COLOR Command Command "CF_COLOR_%1" [CR] "000-063 Directly specify setting value of Color %1 "UP Increment setting value of Color by 1 "DN Decrement setting value of Color by 1 Details Set user controlled value of Color (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.4 CF_TINT Command Command "CF_TINT_%1" [CR] "000-063 Directly specify setting value of Tint %1 "UP Increment setting value of Tint by 1 "DN Decrement setting value of Tint by 1 Details Set Tint value (Available only in the normal Power ON status) The value set by this command will not be saved to the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 19/89