Sanyo PLC-ZM5000L RS232C Expand - Page 14

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications 6 Status Read Command Table 6.1 Image Status Read Command Table Status Read command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_TINT [CR] CR_IRIS [CR] CR_SHARP [CR] CR_GAMMA [CR] CR_WBAL-R [CR] CR_WBAL-G [CR] CR_WBAL-B [CR] CR_COLTEMP [CR] CR_OFFSET-R[CR] CR_OFFSET-G[CR] CR_OFFSET-B[CR] CR_NZRED [CR] CR_PROGV [CR] CR_IMAGE [CR] CR_IMGGMD [CR] Item Get value of Brightness Get value of Contrast Get value of Color Get value of Tint Get setting status of Iris function Get value of Sharpness Get value of Gamma Get Red value of White Balance Get Green value of White Balance Get Blue value of White Balance Get value of Color temperature Get Offset Red Get Offset Green Get Offset Blue Get setting status of Noise reduction Get setting status of Progressive scan Get Selected Image status Get setting value of Image Gamma 6.2 PC Adjust Status Read Command Table Status Read command CR_FSYNC [CR] CR_TDOTS [CR] CR_CLPPHASE [CR] CR_H-POS [CR] CR_V-POS [CR] CR_DDOTS [CR] CR_DLINE [CR] CR_ORGMODE [CR] CR_PCSTORE [CR] CR_SETPCADJ [CR] Item Get setting value of Fine Sync Get setting value of Total Dots Get setting value of Clamp phase Get setting value of Horizontal Position Get setting value of Vertical Position Get setting value of Display Dots Get setting value of Display Line Get the original signal for PC-Adjusted mode Get status Free/ Stored for PC Adj. mode 1-10 Get currently displayed PC signal in system 6.3 Video Status Read Command Table Status Read command CR_SERSYS [CR] Item Get currently selected signal. In Auto mode, it returns a result by Auto detection. 6.4 Input Status Read Command Table Status Read command CR_INPUT [CR] CR_SOURCE [CR] CR_SRCINP1 [CR] CR_SRCINP2 [CR] CR_SRCINP3 [CR] CR_SRCINP4 [CR] CR_SYSTEM [CR] CR_SYSLIST [CR] CR_MODELIST [CR] CR_HMSLOT [CR] CR_NMSLOT1 [CR] CR_NMSLOT2[CR] CR_NMSLOT3[CR] Item Get selected Input Get selected Source Get selected source for Input 1 Get selected source for Input 2 Get selected source for Input 3 Get selected source for Input 4 Get selected system in current Input mode Get possible system list Get possible mode list Get total number of Inputs Get terminal information of Input1. Get terminal information of Input2. Get terminal information of Input3 14/89