Sanyo PLC-ZM5000L RS232C Expand - Page 50
CF_PTIME Command, 10.36, CF_KEYDIS Command, 10.37, CF_PJPINCODE Command
UPC - 086483079450
View all Sanyo PLC-ZM5000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications 8.10.35 CF_PTIME Command Command "CF_PTIME_%1" [CR] %1 "001" - "180 Directly specify setting time Details Set the time for Count down mode of P-timer. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting value remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.10.36 Command %1 Details Response CF_KEYDIS Command "CF_KEYDIS_%1" [CR] "NONE RC and KEY are both enabled. "RC RC is disabled. "KEY KEY is disabled. Disable RC and/or KEY functions (Available only in the normal Power ON status) Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.10.37 CF_PJPINCODE Command Command "CF_PJPINCODE_%1" [CR] %1 "0000 - 9999 Directly specify PJ PIN code Enter PIN code to cancel PIN code lock (Available only in the normal Power ON status) PIN code can not be changed. (Only PIN code lock is canceled.) Details *When PIN code Lock is enabled: PIN code is matched Command is valid (Acceptable) PIN code is mismatched Command is invalid (Error code "102") PIN code is beyond %1 available range ---- Command is invalid (Error code "?") *When PIN code lock is canceled: PIN code is within %1 range Command is valid (Acceptable) PIN code is out of %1 range Command is invalid (Error code is 102) This command is only valid when "PJ PIN code" dialog is displayed to enter PIN code after Power is ON and Countdown is completed. Response When PIN code lock is set to "On1", it needs to send this command every time the projector is turned on. Acceptable "000" [CR] Unacceptable "Error Code" [CR] 50/89