Lexmark CX943 Users Guide - Page 48

Set up, install, and configure 48 4 Click Fax Server Setup. 5 In the To Format field, type [#]@myfax.com, where [#] is the fax number and myfax.com is the fax provider domain. Notes: • If necessary, configure the Reply Address, Subject, or Message fields. • To let the printer receive fax messages, enable the device‑based fax receive setting. Make sure that you have a device‑based fax configured. 6 Click Save. 7 Click Fax Server E‑mail Settings, and then do either of the following: • Enable Use E‑mail SMTP Server. Note: If the E‑mail SMTP settings are not configured, then see "Configuring the e‑mail SMTP settings" on page 53. • Configure the SMTP settings. For more information, contact your e‑mail service provider. 8 Apply the changes. Setting up fax using a standard telephone line Note: These instructions apply only to printers that support analog fax. For more information, see "Supported fax" on page 45. CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm. CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not use the fax feature during a lightning storm. CAUTION-POTENTIAL INJURY: To reduce the risk of fire, use only a 26 AWG or larger telecommunications (RJ-11) cord when connecting this product to the public switched telephone network. For users in Australia, the cord must be approved by the Australian Communications and Media Authority.