Lexmark CX943 Users Guide - Page 219

Use printer menus 219 Menu item Description Toner patch sensor setup Full calibration Run the full color calibration. Toner patch sensor setup Print TPS information page Print a diagnostic page that contains information on toner patch sensor calibration. App Configuration LES Applications Off On* Enable Lexmark Embedded Solutions (LES) applications. Scanner Configuration Scanner Manual Registration Print Quick Test Print a Quick Test target page. Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins must be reset. Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Reset Maintenance Counter Reset the counter after replacing the ADF maintenance kit. Scanner Configuration Edge Erase Flatbed Edge Erase (3*) ADF Edge Erase (3*) Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. Scanner Configuration ADF Deskew ADF Electronic Deskew (On*) Reduce skewing of documents that are scanned from the ADF. Scanner Configuration Disable Scanner No* Yes ADF Only Disable the scanner when it is not working properly. Scanner Configuration Tiff Byte Order CPU Endianness* Little Endian Big Endian Set the byte order of a TIFF‑formatted scan output. Scanner Configuration Exact Tiff Rows Per Strip On* Off Set the RowsPerStrip tag value of a TIFF‑formatted scan output. Note: An asterisk (*) next to a value indicates the factory default setting.