Lexmark CX943 Users Guide - Page 44

Set up, install, and configure 44 Enabling Magnification mode 1 In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message. Note: For printer models without built-in speakers, use headphones to hear the message. 2 Using two fingers, do the following: a Touch Magnification mode. b Touch OK. Note: If the gesture does not work, then apply more pressure. For more information on navigating a magnified screen, see "Navigating the screen using gestures" on page 43. Adjusting the Voice Guidance speech rate 1 From the home screen, touch Settings > Device > Accessibility > Speech Rate. 2 Select the speech rate. Adjusting the default headphone volume 1 From the home screen, touch Settings > Device > Accessibility. 2 Adjust the headphone volume. Note: The volume resets to the default value after the user exits Accessibility mode or when the printer wakes from Sleep or Hibernate mode. Adjusting the default internal speaker volume 1 From the home screen, touch . 2 Adjust the volume. Notes: • If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer performance. • The volume resets to the default value after the user exits Accessibility mode or when the printer wakes from Sleep or Hibernate mode. Enabling spoken passwords or personal identification numbers 1 From the home screen, touch Settings > Device > Accessibility > Speak Passwords/PINs. 2 Enable the setting.