Lexmark CX943 Users Guide - Page 271

Use printer menus 271 Menu item Network Address UAA LAA PCL SmartSwitch Off On* PS SmartSwitch Off On* Job Buffering On Off* Mac Binary PS Auto* On Off Description View the network addresses. Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Temporarily store print jobs in the printer hard disk before printing. Note: This menu item appears only when a hard disk is installed. Set the printer to process Macintosh binary PostScript print jobs. Notes: • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Wi‑Fi Direct Menu item Description Enable Wi‑Fi Direct On Off* Set the printer to connect directly to Wi-Fi devices. Wi‑Fi Direct Name Specify the name of the Wi‑Fi Direct network. Wi‑Fi Direct Password Set the password to authenticate and validate users on a Wi‑Fi connection. Show Password on Setup Page Off On* Show the Wi‑Fi Direct Password on the Network Setup Page. Preferred Channel Number 1-11 Auto* Set the preferred channel of the Wi‑Fi network. Group Owner IP Address Specify the IP address of the group owner. Auto‑Accept Push Button Requests Off* On Accept requests to connect to the network automatically. Note: Accepting clients automatically is not secured. Note: An asterisk (*) next to a value indicates the factory default setting.