Lenovo ThinkServer TD200x Hardware Maintenance Manual for TD200x - Page 226

• Extender card (see Removing an extender card). • DIMMs (see Removing a memory module). • Microprocessors and heat sinks (see Removing a microprocessor and heat sink). • Battery (see Removing the battery). Step 11. Rotate the release lever toward the front of the chassis. Step 12. Slide the system board toward the front of the server to disengage the tabs from the chassis; then, grasp the handles and carefully lift the system board out of the server. Step 13. If you are instructed to return the system board, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. Installing the system board 00000 00000 00000 0000 00000 00000 0000 00000 00000 0000 00000 00000 0000 00000 00000 1 Handle 2 Release lever To install the system board, complete the following steps: Step 1. Step 2. Touch the static-protective package that contains the system board to any unpainted metal surface on the server; then, remove the system board from the package. Hold the system board by the handles and insert the system board into the chassis at an angle; then, slide it toward the rear of the server. Note: Make sure that none of the server cables are caught under the system board. 218 ThinkServer TD200x Hardware Maintenance Manual