Lenovo ThinkServer TD200x Hardware Maintenance Manual for TD200x - Page 225
Removing the system board
![]() |
View all Lenovo ThinkServer TD200x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Removing the system board 00000 00000 00000 0000 00000 00000 0000 00000 00000 0000 00000 00000 0000 00000 00000 1 Handle 2 Release lever To remove the system board, complete the following steps: Step 1. Step 2. Step 3. Read the safety information that begins on page Safety information. Turn off the server and all attached devices; then, disconnect all power cords and external cables. Carefully turn the server on its side so that it is lying flat, with the cover facing up. Attention: Do not allow the server to fall over. Step 4. Unlock and remove the side cover (see Removing the left-side cover). Step 5. Remove the power supply or power supplies from the power-supply cage (see Removing a hot-swap power supply). Step 6. Rotate the power-supply cage to its open position (see Opening the power-supply cage). Step 7. Remove the air baffle (see Removing the air baffle). Step 8. Remove the fan-cage assembly (see Removing the fan cage assembly). Step 9. Note where the cables are connected to the system board; then, disconnect them. Step 10. Remove any of the following components that are installed on the system board and put them in a safe, static-protective place: • Adapters (see Removing an adapter). Chapter 7. Installing optional devices and replacing customer replaceable units 217
![](/manual_guide/products/lenovo-thinkserver-td200x-hardware-maintenance-manual-td200x-b6a7ca6/225.png)