Konica Minolta AccurioPress C6100 AccurioPress C6100/C6085 User Manual Additio - Page 194
If [ON] is selected and Color Density Control is performed simultaneously with Both Sides Adjust
View all Konica Minolta AccurioPress C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
14.2 [Quality Adjustment] 14 9 If you select [ON] in [Chart Tray Setting] in step 7, select a paper feed tray from the buttons on the right side of [Chart Tray Select]. % Press [OK] on the [Chart Tray Setting] screen to return to the [Basic Setting] screen. 10 Press [Next] to select [Switch Color(1st or 2nd)]. % Select [Normal] to correct primary colors only. Select [Precise] to correct both primary colors and secondary colors. 11 If you select [ON] in [Periodical Adj. Execution] in step 5, select [ON] or [OFF] at the right of [Adjustment Interval]. 12 If [ON] of [Adjustment Interval] is selected in step 11, press [Change] in [Adjustment Interval], then enter the adjustment interval. % Press [OK ]on the [Change Adjustment Interval] screen to return to the [Basic Setting] screen. % Press [OK] to return to the [Color Density Control] screen. 13 Select [Concurrent Execution of BothSidesAdj.]. % When simultaneously performing the both sides adjustment when Intelligent Quality Optimizer IQ501 is installed on the machine, select [ON]. % If [ON] is selected and Color Density Control is performed simultaneously with Both Sides Adjust, the sheet count specified in [Adjustment Interval] of [Periodical Both Sides Adj.] is reset. % When both-side adjustment is performed, the result is reflected to [Both Sides Adj.] on the [MACHINE] screen - [AutoMeasure] tab screen. 14 Press [Close] to return to the [Quality Adjustment Menu] screen. You can check the adjustment result of Color Density Control (Color Control) on the screen. The adjustment result is displayed in graph by each color of CMYK in a way to compare the target values with the measured post-correction values. AccurioPress C6100/C6085 14-15