Konica Minolta AccurioPress C6100 AccurioPress C6100/C6085 User Manual Additio - Page 161
Administrator Setting]: [Controller Administrator Setting], Switch No., Problem/Requirement,
View all Konica Minolta AccurioPress C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
12 [Administrator Setting]: [Controller Administrator Setting] 12.16 Switch No. 159 160 161 162 Problem/Requirement The APPE profile that converts CMYK data to gray scale ordinarily reproduces the gradation of the CMYK high-density area; therefore, the black density 100% area of original data cannot be output with black density 100%. Such an area should be output forcibly with black density 100%. The maximum number of able to registered CMYK-CMYK direct link profiles should be increased to 100 or more. When the number of CMYK-CMYK direct link profiles to be registered exceeds the maximum, a new profile should be registered by automatically deleting the oldest profile. When [2-Color Printing] (used as Single Color) is specified in the PS Plug-in driver, if the same special colors specified in the driver are used in the original for printing, the density may become thinner. When the same special colors are specified, prints should be made while the density remains unchanged. Solution reached when turned On Set the option so that an image object can be held with black density 100%. Setting value: Off: Does not hold black density 100% in gray-scale output mode. On: Holds black density 100% in grayscale output mode. [Restrictions] • An image object is forcibly output, so the gradation of the high-density part may be damaged. This function is available only for the scanned text data. • When this function is set to On, the Pure Black setting is not reflected. • This setting is available only for PS(CPSI), PDF(CPSI), PDF(APPE), TIFF(Emperor), and PPML. Also, CPSI is available only when switch 158 is set to On. Setting value: Off: Allows you to register up to 50 CMYK-CMYK device link profiles. When 51 or more CMYK-CMYK device link profiles are included in the database at startup, the system stores only the 50 items of which the registration date is later. The remaining 50 items are deleted (however, this setting is configured so that the profiles specified by color default cannot be deleted). On: Allows you to register up to 100 CMYK-CMYK device link profiles. Setting value: Off: Disables a new profile from being registered when the maximum number of CMYK-DLP profiles have already been registered. On: Deletes the table of the oldest creation data and time from the list and registers a new CMYK-DLP profile when the maximum number of CMYK-DLP profiles have already been registered. Setting value: Off: When the special colors with the plate (CMYK) replaced are specified for 2-color printing, if they are used in the original, the special colors used in the original are changed. However, the density may become thinner. On: When the special colors with the plate (CMYK) replaced are specified for 2-color printing, if they are used in the original, the original is printed out with the same density while the special colors used in the original remain unchanged. 12-34 AccurioPress C6100/C6085