Invacare R51 Owners Manual - Page 53

Installing/Removing the Battery Boxes

Get Invacare R51 PDF manuals and user guides View all Invacare R51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

SECTION 12-BATTERIES 2. Remove the existing batteries from the battery boxes. Refer to Installing/Removing the Batteries Into/From the Battery Boxes on page 55. 3. Clean the new battery terminals. Refer to Cleaning Battery Terminals on page 64. 4. Install the new batteries into the battery boxes. Refer to Installing/Removing the Batteries Into/From the Battery Boxes on page 55 of this manual. 5. Install the battery boxes onto the wheelchair. Refer to Installing/Removing the Battery Boxes on page 53 of the manual. Installing/Removing the Battery Boxes ƽ WARNING NEVER unplug the battery cables by pulling on the wires. Unplug the battery cables by pulling on the connector ONLY. Otherwise injury or damage may result. NOTE: For this procedure, refer to FIGURE 12.2 on page 54. NOTE: To remove the battery boxes from the wheelchair, reverse the following procedure. 1. Verify that the on/off switch on the joystick is in the off position. 2. Place the front battery box onto the battery tray and connect controller connector to the front battery box. 3. Slide front battery box toward the front of the wheelchair. 4. Place rear battery box onto the battery tray and connect the rear battery box to the front battery box. 5. Connect the front battery box to the controller. ƽ WARNING The battery box retaining strap MUST be fastened securely and adjusted properly to hold battery boxes in place before using the wheelchair. 6. Connect the battery box retaining strap clip together and adjust if necessary. Part No. 1106645 53 R51™and R51LXP

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
SECTION 12—BATTERIES
Part No. 1106645
53
R51™and R51LXP
2.
Remove the existing batteries from the battery boxes. Refer to Installing/Removing the
Batteries Into/From the Battery Boxes
on page 55.
3.
Clean the new battery terminals. Refer to Cleaning Battery Terminals
on page 64.
4.
Install the new batteries into the battery boxes. Refer to Installing/Removing the
Batteries Into/From the Battery Boxes
on page 55 of this manual.
5.
Install the battery boxes onto the wheelchair. Refer to Installing/Removing the Battery
Boxes
on page 53 of the manual.
Installing/Removing the Battery Boxes
±
WARNING
NEVER unplug the battery cables by pulling on the wires. Unplug the battery cables
by pulling on the connector ONLY. Otherwise injury or damage may result.
NOTE: For this procedure, refer to FIGURE 12.2 on page 54.
NOTE: To remove the battery boxes from the wheelchair, reverse the following procedure.
1.
Verify that the on/off switch on the joystick is in the off position.
2.
Place the front battery box onto the battery tray and connect controller connector to
the front battery box.
3.
Slide front battery box toward the front of the wheelchair.
4.
Place rear battery box onto the battery tray and connect the rear battery box to the
front battery box.
5.
Connect the front battery box to the controller.
±
WARNING
The battery box retaining strap MUST be fastened securely and adjusted properly
to hold battery boxes in place before using the wheelchair.
6.
Connect the battery box retaining strap clip together and adjust if necessary.