Invacare R51 Owners Manual - Page 33
Adjusting the Footrest Height
View all Invacare R51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SECTION 6-FRONT RIGGINGS 3. Repeat STEPS 1-2 for the opposite side of the wheelchair. Footrest Release Lever Hinge Pins Footrest Hinge Plate FIGURE 6.1 Installing/Removing the Footrests Adjusting the Footrest Height Model PW93, PW93E, and PW93ST Footrests NOTE: For this procedure, refer to FIGURE 6.2. 1. Remove any accessory from the footrest(s). 2. Remove the footrest from the wheelchair. Refer to Installing/Removing the Footrests on page 32. NOTE: Lay footrest on a flat surface to simplify procedure. 3. Remove the hex bolt, coved washers and locknut that secure the lower footrest to the footrest support. 4. Reposition the lower footrest to the desired height. 5. Reinstall hex bolt, coved washers and locknut that secure lower footrest to footrest support. Tighten securely. 6. Repeat STEPS 1-5 for the other footrest, if necessary. 7. Reinstall the footrest(s) onto the wheelchair. Refer to Installing/Removing the Footrests on page 32. 8. Reinstall any accessory onto the footrest(s). Part No. 1106645 33 R51™and R51LXP