Invacare R51 Owners Manual - Page 49

Repositioning the Joystick

Get Invacare R51 PDF manuals and user guides View all Invacare R51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

SECTION 10-JOYSTICK Repositioning the Joystick NOTE: For this procedure, refer to FIGURE 10.2. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Remove the joystick from the wheelchair. 3. Remove the three hex screws that secure the halves of the mounting bracket to the arm tube. 4. Reposition mounting bracket on opposite arm tube ensuring the threaded plate of the mounting bracket is on the inside of the arm tube as shown in FIGURE 10.2. 5. Using the three hex mounting screws and washers, secure the halves of the mounting bracket to the arm tube. 6. Slide the joystick mounting tube through the mounting bracket to the desired position. 7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting bracket. Mounting Bracket (Threaded Plate) Hex Mounting Screws Adjustment Lock Lever Washers Mounting Bracket Joystick Mounting Tube Arm Tube NOTE: Joystick not shown. FIGURE 10.2 Repositioning the Joystick Part No. 1106645 49 R51™and R51LXP

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
SECTION 10—JOYSTICK
Part No. 1106645
49
R51™and R51LXP
Repositioning the Joystick
NOTE: For this procedure, refer to FIGURE 10.2.
1.
Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2.
Remove the joystick from the wheelchair.
3.
Remove the three hex screws that secure the halves of the mounting bracket to the arm
tube.
4.
Reposition mounting bracket on opposite arm tube ensuring the threaded plate of the
mounting bracket is on the inside of the arm tube as shown in FIGURE 10.2.
5.
Using the three hex mounting screws and washers, secure the halves of the mounting
bracket to the arm tube.
6.
Slide the joystick mounting tube through the mounting bracket to the desired
position.
7.
Turn the adjustment lock lever to secure the joystick mounting tube into the mounting
bracket.
FIGURE 10.2
Repositioning the Joystick
Joystick
Mounting
Tube
NOTE: Joystick
not shown.
Arm
Tube
Mounting Bracket
(Threaded Plate)
Mounting
Bracket
Washers
Hex
Mounting
Screws
Adjustment
Lock Lever