InSinkErator Model WX-300 Owners Manual - Page 6

Installing Disposer

Get InSinkErator Model WX-300 PDF manuals and user guides View all InSinkErator Model WX-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Installing Disposer PERSONAL INJURY • For safe operation, The minimum required distance from the table top or trough to the mounting flange is 6 inches for standard body disposers (as specified by UL). See Figure 5. • Moving shredder parts may cause serious injury if a hopper or cone is not properly installed. CLEAN THE DRAIN LINE With a drain line auger, clear away all hardened waste material in the horizontal drainpipe running from the drain trap to the main waste line. 6 inch min. PROPERTY DAMAGE To avoid excess vibration, InSinkErator recommends a minimum countertop thickness of 16 gage stainless steel. DISPOSER MOUNTING The disposer can be mounted to the sink or trough using a standard InSinkErator mount or an InSinkErator mounting adaptor. NOTE: The InSinkErator #5 Sink Flange can not be used with the Waste Xpress system. NOTE: InSinkErator must approve attachment to a non-InSinkErator sink. Figure 5. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
7
PERSONAL INJURY
• For safe operation, The minimum required distance
from the table top or trough to the mounting flange
is 6 inches for standard body disposers
(as specified by UL). See Figure 5.
• Moving shredder parts may cause serious injury if
a hopper or cone is not properly installed.
DISPOSER MOUNTING
The disposer can be mounted to the sink or trough
using a standard InSinkErator mount or an
InSinkErator mounting adaptor.
NOTE:
The InSinkErator #5 Sink Flange can not be
used with the Waste Xpress system.
NOTE:
InSinkErator must approve attachment to a
non-InSinkErator sink.
PROPERTY DAMAGE
To avoid excess vibration, InSinkErator
recommends a minimum countertop thickness
of 16 gage stainless steel.
Figure 5.
CLEAN THE DRAIN LINE
With a drain line auger, clear away all hardened waste
material in the horizontal drainpipe running from the
drain trap to the main waste line.
Installing Disposer
6 inch min.