Icom IC-705 Ci-v Reference Guide english - Page 7

REMOTE CONTROL Remote control (CI-V) information DDCommand table Cmd. Sub cmd. Data 1A* 05 SET > Function 0039 00 ~ 05 0041 00 ~ 05 0042 00 ~ 05 0043 00 ~ 05 0044 00/01 0045 00/01 0046 See p. 20. 0047 00/01 0048 00/01 0049 00 ~ 02 0050 00 ~ 02 0051 00 ~ 02 0052 00/01 0053 00/01 0054 00/01 0055 00/01 0056 00 ~ 02 Description Send/read the TX Delay (50 MHz) setting (0 0=OFF, 01=10 ms, 02=15 ms, 03=20 ms, 04=25 ms, 05=30 ms) Send/read the TX Delay (144 MHz) setting (0 0=OFF, 01=10 ms, 02=15 ms, 03=20 ms, 04=25 ms, 05=30 ms) Send/read the TX Delay (430 MHz) setting (0 0=OFF, 01=10 ms, 02=15 ms, 03=20 ms, 04=25 ms, 05=30 ms) Send/read the Time-Out Timer setting (0 0=OFF, 01=3 min, 02=5 min, 03=10 min, 04=20 min, 05=30 min) Send/read the PTT Lock setting (00=OFF, 01=ON) SPLIT > Send/read the Quick SPLIT setting (00=OFF, 01=ON) SPLIT > Send/read the SPLIT Offset setting SPLIT > Send/read the SPLIT LOCK setting (00=OFF, 01=ON) Tuner > Send/read the PTT Start setting (00=OFF, 01=ON) Send/read the Auto Repeater setting (0 0=OFF, 01=ON (DUP), 02=ON (DUP,TONE)) Send/read the RTTY Mark Frequency setting (0 0=1275 Hz, 01=1615 Hz, 02=2125 Hz) Send/read the RTTY Shift Width setting (00=170 Hz, 01=200 Hz, 02=425 Hz) Send/read the RTTY Keying Polarity setting (00=Normal, 01=Reverse) SPEECH > Send/read the SPEECH Language setting (00=Japanese, 01=English) SPEECH > Send/read the Alphabet setting (00=Normal, 01=Phonetic Code) SPEECH > Send/read the SPEECH Speed setting (00=Slow, 01=Fast) SPEECH > Send/read the RX Call Sign SPEECH setting (0 0=OFF, 01=ON (Kerchunk), 02=ON (All)) Cmd. Sub cmd. Data Description 1A* 05 SET > Function 0057 00/01 SPEECH > Send/read the RX>CS SPEECH setting (00=OFF, 01=ON) 0058 00/01 SPEECH > Send/read the MIC Up/Down SPEECH setting (00=OFF, 01=ON) 0059 00/01 SPEECH > Send/read the S-Level SPEECH setting (00=OFF, 01=ON) 0060 00/01 SPEECH > Send/read the MODE SPEECH setting (00=OFF, 01=ON) 0061 0000 ~ 0255 SPEECH > Send/read the SPEECH Level setting (0000=0% ~ 0255=100%) 0062 00/01 Send/read the [SPEECH/LOCK] Switch setting (00=SPEECH/LOCK, 01=LOCK/SPEECH) 0063 00/01 Send/read the Lock Function setting (00=MAIN DIAL, 01=PANEL) 0064 00/01 Send/read the Memo Pad Quantity setting (00=5 ch, 01=10 ch) 0065 00 ~ 02 Send/read the MAIN DIAL Auto TS setting (00=OFF, 01=Low, 02=High) 0066 00/01 Send/read the MIC Up/Down Speed setting (00=Slow, 01=Fast) 0067 00 ~ 02 Send/read the [NOTCH] Switch (SSB) setting (00=Auto, 01=Manual, 02=Auto/Manual) 0068 00 ~ 02 Send/read the [NOTCH] Switch (AM) setting (00=Auto, 01=Manual, 02=Auto/Manual) 0069 00/01 Send/read the SSB/CW Synchronous Tuning setting (00=OFF, 01=ON) 0070 00/01 Send/read the CW Normal Side setting (00=LSB, 01=USB) 0071 00/01 Send/read the Charging (Power ON) setting (00=OFF, 01=ON) 0072 00/01 Send/read the USB Power Input (Phone, Tablet, PC) setting (00=OFF, 01=ON) 0073 00/01 Send/read the Power OFF Setting (for Remote Control) setting (00=Shutdown only, 01=Standby/Shutdown) SET > Function > Remote MIC Key 0074 See p. 21. Send/read the [A] setting 0075 See p. 21. Send/read the [B] setting 0076 See p. 21. Send/read the [] setting 0077 See p. 21. Send/read the [] setting 6