Icom IC-705 Ci-v Reference Guide english - Page 19
Memory content, Data mode OFF
View all Icom IC-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
REMOTE CONTROL Remote control (CI-V) information DDCommand formats •• Memory content Command: 1A 00 1, 2 3, 4 5 6~ 10 11 12 13 14 15 16 ~ 18 19 ~ 21 22 ~ 24 X X X X X X X X X X X X ...... X X X X X X X X X X X 0 X X X X X X X X X X X X X X X X X X 25 26 ~28 29~36 37 ~ 44 45 ~ 52 6 ~ 52 53 ~ 68 XX X X ...... X X X X ...... X X X X ...... X X X X ...... X X XXXXXX 1, 2: Memory group number 0000 ~ 0099: Memory channel group 0100: Call channel group 3, 4: Memory channel numbers •• When Memory channel group is selected, 0000 ~ 0099: 00 ~ 99 •• When Call channel group is selected, 0000, 0001: 144 C1, C2 0002, 0003: 430 C1, C2 5: Split and Select memory setting 5 XX 0=OFF* 1= 1 2= 2 3= 3 0=Split OFF,1=Split ON * Set 0 for Call channel. 6~10: Operating frequency setting LLSee "Operating frequency." (p. 17) 11, 12: Operating mode setting LLSee "Operating mode." (p. 17) 13: Data mode setting 1 byte data (XX) 00: Data mode OFF 01: Data mode ON 14: Duplex and Tone settings 14 XX 0=Duplex OFF 1=Duplex− 2=Duplex+ 0=OFF 1=TONE 2=TSQL 3=DTCS 15: Digital squelch setting 15 X0 Fixed 0=Digital squelch function OFF 1=Digital call sign squelch function ON (DSQL) 2=Digital code squelch function ON (CSQL) 16~18: Repeater tone frequency setting 19~21: Repeater tone frequency setting LLSee "Repeater tone/tone squelch frequency setting." (p. 22) 22~24: DTCS code setting LLSee "DTCS code and polarity setting." (p. 22) 25: DV Digital code squelch setting LLSee "DV Digital code squelch setting." (p. 23) 26~28: Duplex offset frequency setting LLSee "Duplex Offset frequency setting." (p. 17) 29~36: UR (Destination) call sign setting (8 characters, fixed) 37~44: R1 (Access repeater) call sign setting (8 characters, fixed) 45~52: R 2 (Gateway/Link repeater) call sign setting (8 characters, fixed) LLSee "DV TX call signs setting." (p. 23) 53~68: M emory name setting (16 characters, fixed) LLSee "Codes for character entries." (p. 19) To clear the memory channel contents on 1A 00: 1, 2: M emory channel group (0000~0099) You cannot specify group "0100" (Call channel group) 3, 4: Memory channel (0000~0099) 5: "FF," 6 ~ : None NOTE: •• The same data as 6 ~ 52 are stored in 6 ~ 52. •• When the Split function is ON, the data of 6 ~ 52 is used for transmit. •• Even if the Split function is OFF, enter the data into 6 ~ 52 to match your transceiver. We recommend that you set the same data as 6 ~ 52. 18