Icom IC-705 Ci-v Reference Guide english - Page 17
Send/read the CENTER Type, Transmit the Voice TX Memory
View all Icom IC-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
REMOTE CONTROL Remote control (CI-V) information DDCommand table Cmd. Sub cmd. Data 27* 17 0000/ 0001 19 See p. 28. 1A 0000 ~ 0002 1B 00/01 1C 00 ~ 02 1D 0000/ 0001 1E See p. 28. 20 00/01 28 00 00 ~ 08 Description Send/read the Scope hold function ON/OFF status (0000=OFF, 0001=ON) Send/read the Scope Reference level setting Send/read the Sweep speed setting (0000=FAST, 0001=MID, 0002=SLOW) SCOPE > SCOPE SET > Send/read the Scope during Tx (CENTER TYPE) setting (00=OFF, 01=ON) SCOPE > SCOPE SET > Send/read the CENTER Type Display setting (00=Filter Center, 01=Carrier Point Center, 02=Carrier Point Center (Abs. Freq.)) Send/read the Scope VBW setting (0000=NAR, 0001=WIDE) Send/read the Scope Fixed edge frequencies SCOPE > SCOPE SET > Send/read Marker Position (FIX Type/SCROLL Type) setting (00=Filter Center, 01=Carrier Point) Transmit the Voice TX Memory (00=Stop, 01=T1 ~ 08=T8) *(Asterisk) Send/read data *1 Read only data *2 Send only data *3 In the CW mode, if the [PTT] or an external TX switch is ON, or the Break-in function is ON, a message will be transmitted as CW code when you send it from your PC. *4 Sending the power ON command (18 01) turns ON the transceiver when the transceiver is OFF (Standby/Shutdown). *5 To insert a counter, first clear the other channel's counter. *6 Set at least 1 GPS sentence to ON. Up to 4 GPS sentences can be set to ON at the same time. *7 Output setting is automatically set to OFF after turning OFF the transceiver. 16