Icom IC-705 Ci-v Reference Guide english - Page 12

REMOTE CONTROL Remote control (CI-V) information DDCommand table Cmd. Sub cmd. Data Description 1A* 05 AUDIO > AUDIO SCOPE SET 0239 00/01 Send/read the FFT Scope Waveform Type setting (00=Line, 01=Fill) 0240 See p. 21. Send/read the FFT Scope Waveform Color setting 0241 00/01 Send/read the FFT Scope Waterfall Display setting (00=OFF, 01=ON) 0242 See p. 21. Send/read the Oscilloscope Waveform Color setting VOICE 0243 0000 ~ 0255 Send/read the TX LEVEL setting (0000=0% ~ 0255=100%) 0244 00/01 VOICE TX SET > Send/read the Auto Monitor setting (00=OFF, 01=ON) 0245 01 ~ 15 VOICE TX SET > Send/read the Repeat Time setting (01=1sec ~ 15=15sec) KEYER > KEYER 001 0246 00 ~ 04 Send/read the Number Style setting (00=Normal, 01=190→ANO, 02=190→ANT, 03=90→NO, 04=90→NT) 0247 01 ~ 08 Send/read the Count Up Trigger setting (01=M1 ~ 08=M8) 0248 0001 ~ 9999 Send/read Present Number setting (0001=1 ~ 9999=9999) KEYER > CW-KEY SET 0249 0000 ~ 0255 Send/read Side Tone Level setting (0000=0% ~ 0255=100%) 0250 00/01 Send/read Side Tone Level Limit setting (00=OFF, 01=ON) 0251 01 ~ 60 Send/read Keyer Repeat Time setting (01=1sec ~ 60=60sec) 0252 28 ~ 45 Send/read Dot/Dash Ratio setting (2 8=1:1:2.8 ~ 45=1:1:4.5 in 0.1 steps) 0253 00 ~ 03 Send/read Rise Time setting (00=2ms, 01=4ms, 02=6ms, 03=8ms) 0254 00/01 Send/read Paddle Polarity setting (00=Normal, 01=Reverse) 0255 00 ~ 02 Send/read Key Type setting (00=Straight, 01=Bug, 02=Paddle) 0256 00 ~ 02 Send/read MIC Up/Down Keyer setting (00=OFF, 01=ON (UP/DOWN), 02=ON (A/B)) DECODE > RTTY DECODE SET 0257 00 ~ 03 Send/read the FFT Scope Averaging setting (00=OFF, 01=2, 02=3, 03=4) 0258 See p. 21. Send/read the FFT Scope Waveform Color setting 0259 00/01 Send/read the Decode USOS setting (00=OFF, 01=ON) Cmd. Sub cmd. Data Description 1A* 05 DECODE > RTTY DECODE SET 0260 00/01 Send/read the Decode New Line Code setting (00=CR,LF,CR+LF, 01=CR+LF) 0261 00/01 Send/read the TX USOS setting (00=OFF, 01=ON) 0262 See p. 21. Send/read the Font Color (Receive) setting 0263 See p. 21. Send/read the Font Color (Transmit) setting DECODE > RTTY DECODE LOG 0264 00/01 Send/read the Decode Log setting (00=OFF, 01=ON) 0265 00/01 Log Set > Send/read the File Type setting (00=Text, 01=HTML) 0266 00/01 Log Set > Send/read the Time Stamp setting (00=OFF, 01=ON) 0267 00/01 Log Set > Send/read the Time Stamp (Time) setting (00=Local, 01=UTC) 0268 00/01 Log Set > Send/read the Time Stamp (Frequency) setting (00=OFF, 01=ON) RECORD > Recorder Set 0269 00/01 Send/read the TX REC Audio setting (00=Direct, 01= Monitor) 0270 00/01 Send/read the RX REC Condition setting (00=Always, 01=Squelch Auto) 0271 00/01 Send/read the File Split setting (00=OFF, 01=ON) 0272 00/01 Send/read the PTT Auto REC setting (00=OFF, 01=ON) 0273 00 ~ 03 Send/read the PRE-REC for PTT Auto REC setting (00=OFF, 01=5sec, 02=10sec, 03=15sec) RECORD > Player Set 0274 00 ~ 03 Send/read the Skip Time setting (00=3sec, 01=5sec, 02=10sec, 03=30sec) SCAN > SCAN SET 0275 00/01 Send/read the SCAN Speed setting (00=Slow, 01=Fast) 0276 00/01 Send/read the SCAN Resume setting (00=OFF, 01=ON) 0277 00 ~ 10 Send/read the Pause Timer setting (00=2sec ~ 09=20sec in 2 seconds, 10=HOLD) 0278 00 ~ 06 Send/read the Resume Timer setting (00=0sec ~ 05=5sec, 06=HOLD) 0279 00 ~ 04 Send/read the Temporary Skip Timer setting (00=5min, 01=10min, 02=15min, 03=While Scanning, 04=While Powered ON) 11