HP XP P9500 HP StorageWorks P9000 Remote Web Console Messages (AV400-96375, Ma - Page 39
HP XP P9500 Manual
View all HP XP P9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Table 18 Error codes (part code 0405) (continued) Part Code 0405 Error Number 7205 0405 7206 0405 7207 0405 8002 Error Message An error occurred during SVP processing. An error occurred during SVP processing. An error occurred during SVP processing. An error occurred during SVP processing. Recommended Action If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. Isolate the abnormal section following the procedure below: Rebooting the PC Checking the LAN card/LAN cable Checking the IP address of the PC Replacing the PC Turning on, then off the DKC (care should be taken.) Severity Level E E E E 0405 8003 The subsystem status is invalid. Isolate the abnormal section following E the procedure below: Rebooting the PC. If this does not fix the problem: Checking the LAN card/LAN cable. If this does not fix the problem: Checking the IP address of the PC. If this does not fix the problem: Replacing the PC. If a new PC does not fix the problem: Turn the DKC on, then off (care should be taken. 0405 8202 0405 8203 0405 8204 0405 8205 0405 8206 0405 0405 8301 55263 0405 55506 The DKCMAIN microcode does not support this program product. Contact the Support Center for the plans E of the program product to be supported by DKCMAIN. This program product needs a later Please contact HP Technical Support. E version of hardware. Please contact HP Technical Support. To use this program product, it is Allocate additional shared memory, and E required to enable the program product enable the program product. by allocating additional shared memory. Add cache memory in case of need. This program product remains in the configuration. Please contact HP Technical Support. Please contact HP Technical Support. E This program product is in use, you cannot remove this program. Stop using this program product function. W The subsystem status is invalid. Retry this operation. E The specified program product cannot If the same problem persists despite E be removed, because the license for it is retrying, please contact HP Technical allocated to the SLPR. Support. Since the licensed capacity of SLPR0 is If the same problem persists despite E insufficient, the partition capacity can't retrying, please contact HP Technical be increased. Support. Part code 0405 39