HP XP P9500 HP StorageWorks P9000 Remote Web Console Messages (AV400-96375, Ma - Page 153

Table 50 Error codes (part code 6005) (continued) Part Code 6005 Error Number 8849 6005 8850 6005 8851 6005 8852 6005 8854 Error Message Recommended Action Severity Level Specified volume is not part of Remote The specified volume is not W Copy pair (Not in Duplex(PAIR), part of a Continuous Access Pending(COPY), Suspend(PSUS) state). Synchronous pair. Check the volume. Invalid RCU serial number, SSID, Link Address or Controller ID. Check the serial number, W SSID, link address and controller ID of the RCU, and set the correct value. Then retry the operation. If the same error occurs, please contact HP Technical Support. The specified volume is not a R-VOL. Refresh the window, and W check whether the specified volume is a R-VOL. R-VOL status change failed after M-VOL Confirm the R-VOL status. W status change. Confirm R-VOL status. Delete Pair(Pairsplit-S) operation failed because M-VOL is in Simplex(SMPL) status. The operation failed, W because of one of the following reasons: • The specified volume is simplex. • There is no duplex, duplex-pending, or suspend volume in the group. Verify the volume status, and retry the operation. 6005 8855 Delete(Pairsplit-S) operation failed because specified volume or other volume in the same group is in status transition. The operation failed, W because of one of the following reasons: • The status of the specified volume or another volume in the same group is Deleting. • The status of the specified volume or another volume in the same group is Suspending. Wait for the transition of status to complete, then retry the operation. If the transition of status does not occur, delete the volume by using the "Force" mode or the "Delete pair by force" option. 6005 8860 6005 8861 An internal error occurred. An internal error occurred. Please contact HP Technical E Support. Please contact HP Technical E Support. Part code 6005 153