Garmin Quest Owner's Manual - Page 12
Vehicle Installation, To snap the cradle on the suction mount, To insert the Quest in the cradle - power cord
![]() |
UPC - 753759041762
View all Garmin Quest manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
UNIT OVERVIEW > VEHICLE INSTALLATION Vehicle Installation Select a suitable location for installing the unit that allows routing of the power cord and does not interfere with vehicle operation. Refer to the warnings on pages iv-v. If you are NOT using a remote antenna, be certain to select a location where the Quest's flip-up antenna has a relatively unobstructed view of the sky. For optimal use, position the antenna parallel to the surface of the road. NOTE: An optional external remote antenna (Garmin GA 27C) may be needed when using the unit in a vehicle with a coated windshield or an in-screen heating system. To snap the cradle on the suction mount: 1. Align the ball on the end of the suction mount with the socket (hole) on the back of the cradle. 2. Press firmly to snap the ball into the socket. To insert the Quest in the cradle: Release tab Suction cup Cradle Suction Lever cup tab 1. Flip up the antenna. 2. Angle the Quest forward as shown above. Fit the bottom of the Quest into the cradle. 3. Tilt the unit back until it snaps into the cradle. To mount the vehicle suction mount: 1. To ensure a tight grip, clean and dry your windshield. 2. Pull the lever on the suction cup toward you. Place the suction cup on your windshield. 3. Flip the lever toward the windshield. Rotate the cradle to obtain a maximum viewing angle. 4. Plug the power cable into an available receptacle. 4 Quest Owner's Manual
![](/manual_guide/products/garmin-0100045400-owners-manual-a13ac4c/12.png)