Epson SureColor F10070 Users Guide - Page 82
with the center of the triangular holes in the, Adjust so that the edges of the media are aligned
View all Epson SureColor F10070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
SC-F10000 Series User's Guide E Flip the Auto switch to . Basic Operations Note: You can confirm differences in tension by lightly tapping both edges of the media as shown in the illustration below. F Lower the media loading lever. G Confirm that the media is attached without looseness on the front and back sides. If the tension on the left and right of the media is different in the areas shown in the illustration below, the media will not be taken up correctly. When one side is loose, restart the procedure from Step 2. H Move to the front side, and while holding the tabs of the media edge plate on both sides, move the plate to the top edge of the media. Adjust so that the edges of the media are aligned with the center of the triangular holes in the media edge plates. The media edge plates prevent the media from riding up and keep fibers on the cut edge of the media from touching the print head. Load correctly. 82