Epson Pro L30000U Users Guide - Page 301

Solutions to Projector Power or Shut-Off Problems If the projector does not come on when you press the power button or it shuts off unexpectedly, try the following solutions: • Make sure the power cord is securely connected to the projector and to a working electrical outlet. • The projector's buttons may be locked for security. Unlock the buttons or use the remote control to turn on the projector. • Make sure the power switch is turned on. • If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receiver setting is turned on in the projector's menu, if available. • If you have set the remote control to operating only a projector with a matching ID, set the ID switch to Off. • The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson. Parent topic: Solving Projector or Remote Control Operation Problems Related references Projector Setup Settings - Extended Menu Where to Get Help (U.S. and Canada) Related tasks Turning On the Projector Turning Off the Projector Unlocking the Projector's Buttons Replacing the Remote Control Batteries Setting the Remote Control ID Solutions to Remote Control Problems If the projector does not respond to remote control commands, try the following solutions: • Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries. • Make sure you are operating the remote control within the reception angle and range of the projector. • Make sure the projector is not warming up or shutting down. • Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release the button to wake the remote control up. 301