Edimax IC-3115W Manual - Page 52
Keep Network Setting: Reset all settings
View all Edimax IC-3115W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Restore Config Reboot Now Reset to default current configurations as a file and save it on your computer's hard drive. Click the 'Browse' button to select a previously-saved configuration file on your computer's hard drive, and then click 'Apply' to upload the configuration file. Click this button to reboot the network camera. This function is useful when you think the network camera is not working properly. Reset the network camera's settings back to default values. There are 2 options: 1) Keep Network Setting: Reset all settings back to default value, but keep network settings. You can still use the same IP address to connect to the network camera. 2) Factory Default: Reset all settings, include network settings. Please reconnect to the network camera by its default IP address 192.168.2.3, or run EdiView Finder again to find its IP. Click 'Apply' to reset. You can also press and hold the 'WPS / Reset' button for more than 10 seconds to reset the network camera's settings to default values. 51