Dell Vostro 5471 Ownerss Manual - Page 42
eDP cable, Removing the eDP cable
View all Dell Vostro 5471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. Install the following components on the new palm rest: a) display assembly b) keyboard c) system board d) hard drive e) powered button f) Input Output(I/O) board g) WLAN card h) solid state drive(SSD) i) heat sink j) system fan k) touchpad l) speaker m) battery n) base cover 4. Follow the procedure in After working inside your computer. eDP cable Removing the eDP cable 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) WLAN card c) display assembly d) display bezel e) camera f) display panel g) display hinge 3. Unroute the eDP cable from the routing channel to remove from the display. 42 Removing and installing components
3.
Install the following components on the new palm rest:
a)
display assembly
b)
keyboard
c)
system board
d)
hard drive
e)
powered button
f)
Input Output(I/O) board
g)
WLAN card
h)
solid state drive(SSD)
i)
heat sink
j)
system fan
k)
touchpad
l)
speaker
m)
battery
n)
base cover
4.
Follow the procedure in
After working inside your computer
.
eDP cable
Removing the eDP cable
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a)
base cover
b)
WLAN card
c)
display assembly
d)
display bezel
e)
camera
f)
display panel
g)
display hinge
3.
Unroute the eDP cable from the routing channel to remove from the display.
42
Removing and installing components